West 5 community in London, Ontario, will pursue high penetration of electric vehicles, and is exploring an innovative marketing program of including them with the sale of each new condominium unit. The primary objective of this project is to determine an economical approach to create an acceptable infrastructure for these electric vehicles that will be […]

Efficient yet simple energy storage schemes and smart electronics will not only boost PV system efficiencies but it will also lead to many innovative applications at the system level such as solid state lighting, active bypass diodes, bifacial configurations etc. This research project seeks to develop a novel and efficient on-cell energy storage scheme. By […]

This project will develop appropriate strategies for a “Smart Community” of the future with respect to the integration of food growing and processing spaces into the community. This may range from rooftop greenhouses, residential growing sunspaces, community gardens, food producing building components, etc. As well this proposal will investigate how food production will interact with […]

While electric vehicles (EVs) are generally viewed as non-polluting and environmentally friendly, EV utilization brings other concerns such as: range anxiety, battery charging issues, cost of electricity, and network overload. Furthermore even though EVs are better for the environment in comparison with the traditional vehicles powered with internal combustion engine, they are still vehicles on […]

Urban stormwater re-use is gaining acceptance in Canadian jurisdictions as a means to offset anticipated increases in potable water demand from urbanization and climate change. S2e Technologies has partnered with Queen's University to determine if a net economic benefit can be achieved from potable water savings in large-scale stormwater re-use facilities in Canada. The new […]

Development of stormwater management plans in Ontario has focused primarily on sizing of conveyance infrastructure and stormwater management ponds that mitigate the receiving water impacts of new developments. The focus has shifted in recent years towards the implementation of Low Impact Development (LID) that emphasizes the control of stormwater runoff at the source. Although several […]

The proposed project will survey “best-in-class” decentralized water conservation technologies and approaches such as rainwater harvesting systems and greywater recycling systems for use in single family residential dwellings in Canada. The proposed project will also survey all tools and resources provided by water conservation authorities such as CMHC to homeowners, building designers and municipalities. The […]

Combining Building Integrated Photovoltaic / Thermal (BIPV/T) system and Air Source Heat Pump (ASHP) with a thermal storage potentially can increase the efficiency of the heat pump and therefore reduce cost of heating and cooling for the building. In addition, this system potentially can reduce the GHG emission. A hollow core concrete floor can be […]

Incorporating the Air Source Heat Pump (ASHP) into Building Integrated Photovoltaic/Thermal (BIPV/T) system has the potential to reduce building heating and cooling costs and dependence on non-renewable heating fuels. ASHPs could boost the quality and quantity of heat output of a BIPV/T system by delivering a seasonal Coefficient of Performance (COP) of between 2.0 and […]

Through the Ontario Green Energy Act, solar manufacturing is rapidly growing in Ontario with S2E being involved in several new initiatives including a new lamination facility in London, Ontario. Several fundamental problems need to be addressed in the lamination procedure and materials required for photovoltaic (PV) panel construction. To increase panel efficiencies, this project will […]

One way to improve the efficiency of a building is to use thermal storage material. A recent thermal storage strategy is to use phase change material (PCM) which allows for the storage and release of thermal energy. One of the main advantages of using PCM over traditional thermal storage (like concrete) is that PCM can […]

This project involves the feasibility study of specific community microgrid technologies for the development of a Smart Community in London, Ontario by SE2 Technologies Inc. A first of its kind, such a community will represent a learning platform for universities and other cities in Canada. The smart community will consist of a minimum of 50 […]