This is the first time that leading edge technologies are being put together: a microwave (MW) treatment process, a struvite crystallizer and an anaerobic digester, as a total manure treatment system for typical dairy farm operations. The new 915 MHz microwave unit will provide efficient nutrient solubilization and the resulting solution is suitable for generating […]

Finite element modelling (FEM) can be used enhance the understanding of physical testing results and will be applied to two distinct structural problems. The first problem will involve combined loading of concrete masonry walls, and the second problem will involve the performance of adhered stone veneer under wind loading. Combined compressive and out of plane […]

Polycyclic aromatic hydrocarbons (PAHs) release to stormwater through wear of asphalt and tire as well as deposition of vehicle exhaust – are of great concern due to its acute toxic, carcinogenic and estrogenic effects on aquatic organisms. Stormwater contaminated with these organic pollutants pose a threat to receiving waters. Kerr Wood Leidal (KWL) is a […]

Recent developments in process industry as well as tight environmental discharge regulations required industries to recycle water which means removing contaminants and send it back to the process. Conventional treatment systems consume energy with large carbon footprint. Canadian economic movement towards decarbonization has lead us to focus our research on the development of a material […]

Fall accidents are one of the leading causes for serious work related fatalities and injuries in the construction industry. Every year, construction workers get injured due to falling off of overhead platforms, elevated work stations or into holes in floors and openings in walls. In order to alleviate this issue, several research studies have been […]

This project focuses on the development of Electric Conductive Concrete (ECC) pavements which can efficiently reduce the cost of snow removal of Quebec. Recent research has proven that temperature regulated pavements can melt snow and ice. By taking advantage of all latest technology in conductive inclusions, the project aims will develop an optimized ECC mix […]

The bond between adhered manufactured stone masonry veneer units and the setting bed mortar will be studied. It will involve testing shear, and tensile bond on small samples. Samples will consist of 2 types of adhered manufactured stones; two types of setting bed mortar (Type S, and modified dry-set cement mortar); and two types of […]

The necessity of cost-efficient and reliable wastewater treatment processes has increased in order to meet more stringent levels of environmental regulations, increased system reliability requirements and tightening operational budgets. To aid in meeting these operational goals, a strong market for low-cost, high-fidelity sensor technology that can relay real-time information to system operators on all aspects […]

With the growing demand for energy efficient buildings, conventional steel wall studs are no longer an appropriate choice for exterior walls. Conventional steel studs cause an inordinately high degree of thermal bridging which lowers the energy efficiency of the building. To address this concern, Structa Wire Corporation started the development of an innovative steel stud […]

Cintra Canada Inc. has conducted several research studies on the advantages of implementing managed lanes (lanes where operational/management strategies are implemented in response to varying travel demand/supply conditions) with the focus on the travel speeds, road capacity, and air quality benefits. However, no study to date, has conducted a comprehensive analysis of the system-wide welfare […]

The shock absorption properties of synthetic turf playing surfaces are mainly controlled by a granular infill composed of sand and rubber crumbs. Throughout their useful life, playing surfaces show decreasing shock absorption properties. Particle breakage, segregation, compaction and contamination with fine particles have been invoked to explain the aging of playing surfaces. In this project, […]

Design of loadbearing, out-of-plane (OOP), tall masonry walls tends to have stringent limits related to their buckling stability and the scarcity of research on their structural reliability. This currently puts the masonry industry at a disadvantage as a construction alternative compared to other structural options. The dearth of masonry research and innovation in slender wall […]