Emission of CO2 from industrial processes contributes to global warming. Numerous technologies have been proposed to reduce the amount of CO2 released to the environment. The C-3 process, in which ~50% of CO2 in flue gas can be captured using small water droplets, shows great promise for low-cost removal of CO2. Enviro Innovate, the owner […]

Nowadays, the sustainable supply of energy is challenging due to growing concerns over climate change and increasing global demands. This leads to an urgent need for developing sustainable and renewable biofuels and bioenergy. Biomass gasification is a very promising route for bioenergy production. However, syngas from this process normally contains unacceptable level of tar. Tar […]

In this project, an advanced silicon-based lithium ion battery will be manufactured. The expected energy density is 750-1000Wh/L and cycle life is about 2000 time (capacity remaining rate>80%), which means the working time of your cell phone, laptop can be extended to 3-5 times on a charge and they can maintain a good working condition […]

In this project, carbon-based nano-materials were used not only to capture CO2, but also function as a nano-carrier platform to uptake the drugs and genes for cancer therapeutic applications. In other words, the main objective of this project is to tackle two major issues in our society: greenhouse gas emission and cancer.

Copper, a conductive metal, forms the basis of much of our manufacturing and electrical infrastructure. Yet, despite high demands for the metal, supply is not keeping pace. One of the chief reasons is that copper extraction faces steep technical challenges that have steadily pushed up capital expenditures. We propose to use a recent innovation called […]

To create the impetus for industry-level improvements in safety, the COAA has embarked on an initiative “Twice as Safe, Twice as Productive by 2020”. The purpose of this project is to support this initiative by understanding the safety cultures and the levels of maturity across the construction industry and motivating improvements in all Albertan construction […]

The key objective of this research is to develop a unit for combined heat and power production using biomass feedstock that can be used in remote areas where no grid power is available. Canada as the second largest country in the world, has a great potential for such units. Aboriginal communities or remote work facilities […]

Aqueous rechargeable lithium battery has received great attention recently due to the less toxicity, lower cost and higher safety compared to the non-aqueous systems. When using the commercially available lithium manganese oxide as active materials, there are demands in suppressing manganese dissolution and graphite consumption in the cathode. As a potential solution to achieve these […]

Properties of metallurgical coke are very important in production of iron using blast furnace. About 90% of the coking coals produced are used for this purpose. Coal rank was historically used to evaluate coal for production of metallurgical coke. Coke reactivity index (CRI) and coke strength after reaction (CSR) with carbon dioxide are now routinely […]

Wind energy is the fastest growing source of electricity in Canada. However, its supply is not aligned with the energy demand, thus energy storage becomes important. The Power to Gas process (P2G) is a promising technology in which electrical energy is converted into chemical energy (methane). Methane can be stored in already existing natural gas […]

Biodegradable polymeric biomaterials have been used extensively for medical applications such as implants, drug/gene delivery, and scaffolds. To determine the end applications, the molecular characteristics of these polymeric biomaterials are important which must be characterized. The development of reliable and fast analytical tool to detect, separate and characterize polymeric biomaterials in medical devices and drug […]

The project will focus on the development and installation of a modification to convert existing biological wastewater treatment systems (particularly, activated sludge and similar processes) to circulating fluidized bed bioreactors (CFBBR). The CFBBR has already been proven on the lab and pilot scale to have higher nutrient removal efficiencies and greater handling of high volumetric […]